Robust RFID Reading and Writing
Chainway R5 is a newly-developed wearable UHF reader that enables read distance of 14m. Additionally, it supports the Impinj Gen2X for enhanced RFID performance. It allows user information interaction via Bluetooth coordinated with APP or SDK. And it also can be paired with Android/iOS device to expand RFID capability. This RFID reader can be suitable for warehousing, power inspection, asset management, retail, etc., which provides users with more flexibility to efficiently finish their tasks at hand.
Android / iOS SDK
|
2000mAh Removable Battery
|
IP65 & 1.2m / 4ft. Drop
|
Various Wearable Options
|
Bluetooth Low Energy (BLE) 5.0
|
|
Self-Developed Module Based on Impinj E710
|
Impinj Gen2X for Enhanced UHF Performance
|
900+ Tags/s Read Rate
|
|
| Optical system | |
| Light Source | |
| Image Sensor | |
| Image (Pixels) | |
| Field of View | |
| Decoding Rate | |
| Decoding Capabilities | |
| Roll / Pitch / Yaw | |
| Scanning speed | |
| Print Contrast | |
| Angle | |
| Resolution | |
| Depth of Field | |
| Printing Contrast | |
| Prompting Mode | |
| Interface | |
| Trigger Mode | |
| Setting Mode | |
| Frequency | |
| Communication Distance | |
| Transmission Rate | |
| Current | |
| Capability of Battery |
| Working Current | |
| Start Current | |
| Standby Current | |
| Working Current | |
| Resolution Ratio | |
| FoV | |
| Identification Range | |
| Registration Range | |
| Registration Time | |
| Identification Time | |
| Infared Wavelength | |
| FAR | |
| FRR | |
| Frame Rate | |
| Operating Temp. | |
| Storage Temp. | |
| Power Supply & Data Interface | |
| Operating System Requirements | |
| SDK Fitting System |
| Printing Method | |
| Resolution | |
| Max. Printing Speed | |
| Max. Printing Width | |
| Max. Printing Length |
| RFID Tag | |
| Types | |
| Width | |
| Thickness | |
| Label Roll Diameter | |
| Core Diameter | |
| Label Length | |
| Label Roll Capacity |
| Types | |
| Width | |
| Length | |
| Core Diameter | |
| Capacity |
| 1-D | |
| 2-D | |
| Decoding rate | |
| Interfaces |
| Module |
| Dimensions | 108 mm × 78 mm × 18 mm |
| Weight | 200 g / 7.05 oz. |
| Display | |
| Battery | 2000 mAh (removable) |
| Touch Panel | |
| Power | |
| Material | |
| Speaker | |
| Vibrator | |
| Notification | |
| Microphone | |
| Buzzer | |
| Expansion Slot | |
| Interfaces | |
| Card slot | |
| Cable | |
| Audio | |
| Input Mode | |
| Keypad | ON/OFF, SCAN |
| Sensors | |
| Button | |
| Pupil Lamp | |
| Indicator LED | Red indicator will be ON when charging Green indicator will be ON when device has been fully charged Blue indicator will be ON when battery is higher than 20% Blue indicator will flash when battery is lower than 20% Bluetooth is not paired when bluetooth indicator is OFF Bluetooth is paired when bluetooth indicator is ON |
| Size of adapted phone | |
| Product Material | |
| Colour | |
| Voltage and Current | |
| Input Voltage | |
| Standby Current | |
| AC Adapter | |
| Sleep Current | |
| Comm Interface | |
| GPIO | |
| Baud Rate | |
| Cooling Mode | |
| Work Current | |
| Display Interface | |
| Port | USB Type C |
| Charging Current | 5 V / 1.5 A |
| Charging Duration | 2 hours |
| Ethernet interface | |
| Power Supply | |
| Identification Lamp | |
| Ethernet Interface |
| RF Chip | |
| Impinj Gen2X | |
| Air Interface Protocol | |
| Working Frequency | |
| Output Power | |
| Output Power Flatness | |
| Antenna Interface | |
| Regions Supported | |
| Receive Sensitivity | |
| Tag RSSI | |
| Antenna Detector | |
| Ambient Temp Monitor | |
| Working Mode |
| Connector | |
| Host Communication |
| Input Voltage | |
| Power Consumption in RF Output Mode | |
| Power Consumption in Standby Mode（EN high TTL level） | |
| Power Consumption in Power Down Mode（EN low TTL level） |
| Ethernet interface | |
| WLAN | |
| WWAN | |
| WWAN (Europe, Asia) | |
| WWAN (Europe) | |
| WWAN (America) | |
| WWAN (Quad-core) | |
| WWAN (Octa-core) | |
| WWAN (China) | |
| WWAN (Others) | |
| Bluetooth | Bluetooth Low Energy (BLE) 5.0 |
| WWAN(Overseas) | |
| Vo-LTE | |
| GPS | |
| GNSS | |
| GPS (Optional) | |
| USB Type C | USB connection to realize data transfer |
| Note |
| Input Voltage | |
| UHF | |
| HF | |
| Standby |
| Operating System | |
| SDK | Android / iOS SDK Supported |
| Language | |
| Tool | |
| Security |
| CPU（1） | |
| CPU | |
| RAM+ROM（1） | |
| Option 1 | |
| Option 2 | |
| CPU（2） | |
| RAM+ROM | |
| High-level Configuration | |
| MCU | |
| Low-level Configuration | |
| RAM+ROM（2） | |
| RAM+ROM | |
| Storage | |
| RAM | |
| Flash | |
| Expansion |
| Input Voltage | |
| Operating Temp. | -20 °C to +50 °C |
| Storage Temp. | -40 °C to +70 °C |
| Humidity | 5% RH - 95% RH non condensing |
| Luminance of environment | |
| Drop Specification | 1.5 m dropping on concrete |
| Tumble Specification | |
| Ambient Light Immunity | |
| Sealing | IP65 |
| ESD | |
| Note |
| WLAN | |
| WWAN | |
| WWAN (China) | |
| WWAN (Europe) | |
| WWAN (America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS | |
| Note |
| WLAN | |
| WWAN (China) | |
| WWAN (Europe) | |
| WWAN(America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS |
| WLAN | |
| WWAN | |
| Bluetooth | |
| GNSS |
| WLAN | |
| WWAN (China) | |
| WWAN | |
| WWAN(Europe) | |
| WWAN(Overseas) | |
| WWAN (America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS |
| 2D Scanner | |
| Scan engine(Quad-core) | |
| Scan engine(Octa-core) | |
| 1D Linear Scanner | |
| Scan engine | |
| 1D Linear Scanner（Quad-core） | |
| 2D Imager Scanner(Quad-core) | |
| 2D Imager Scanner(Octa-core) | |
| 2D Imager Scanner | |
| 1D Symbologies | |
| 2D Symbologies | |
| Min.Resolution | |
| Note | |
| Note2 |
| Engine | CM710-1 module based on Impinj E710 |
| Frequency | 920-925 MHz / 902-928 MHz / 865-868 MHz |
| Impinj Gen2X | Supported |
| Protocol | EPC C1 GEN2 / ISO18000-6C |
| Antenna | Circular Polarized Antenna (3dBic) |
| Power | 1W (30dBm, support +5~+30dBm adjustable) 2W Optional (33dBm, for Latin America, etc.) |
| Fastest Read Rate (circular polarization) | |
| Output Power | |
| Output Power Precision | |
| Output Power Flatness | |
| Receive Sensitivity | |
| RSSI | |
| Ambient Temp Monitor | |
| Fastest Read Rate | 900+ tags/sec |
| Antenna Detector | |
| Antenna Port | |
| Communication Mode | |
| Read Range | |
| Max Read Range | 11m (Impinj MR6 tag, size 70 x 15mm) 12m (Impinj M750 tag, size 70 x 15mm) 14m (Alien H3 Anti-Metal tag, size 130 x 42mm) |
| Note | * Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment. |
| Note2 |
| Engine | |
| Frequency | |
| Impinj Gen2X | |
| Protocol | |
| Antenna | |
| Power | |
| Max Read Range | |
| Fastest Read Rate | |
| Communication Mode | |
| Note |
| Engine | |
| Frequency | |
| Impinj Gen2X | |
| Protocol | |
| Antenna | |
| Power | |
| Max Read Range | |
| Fastest Read Rate | |
| Communication Mode | |
| Note |
| Engine | |
| Frequency | |
| Protocol | |
| Antenna | |
| Impinj Gen2X | |
| Power | |
| Max Read Range | |
| Note |
| Wavelength | |
| Frequency | |
| Range | |
| Protocol | |
| Note |
| Sensor | |
| Range | |
| Measurement Error | |
| Module | |
| Field of View Angle | |
| Measurement Speed | |
| Measured Distance | |
| Note |
| Sensor | |
| Fingerprint | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note |
| Frequency | |
| Polarization Mode | |
| Gain | |
| Horizontal Angle | |
| Vertical Angle | |
| VSWR | |
| FBR | |
| Characteristic Impedance | |
| Maximum Input Power | |
| Lightning Protection | |
| Antenna Port |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note |
| Polarization Mode | |
| Frequency | |
| Gain | |
| Horizontal Angle | |
| Vertical Angle | |
| VSWR | |
| FBR | |
| Characteristic Impedance | |
| Maximum Input Power | |
| Lightning Protection | |
| Antenna Port |
| Camera | |
| Front Camera | |
| Top Camera | |
| External Camera (optional) | |
| Rear Camera | |
| Internal Camera (Optional) | |
| Note | |
| Note2 |
| Rate | |
| Image Size (pixel) | |
| Paper Width | |
| Paper Diameter | |
| Paper Length |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Remark | |
| Note | |
| Note2 |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note |
| Protocol | |
| Slots | |
| Note |
| HF | |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note | |
| Note2 |
| Rate | |
| Range | |
| FAR | |
| Note | |
| Note2 |
| Measure Position | |
| Measure Method | |
| Measure Distance | |
| Measure Range | |
| Measure Accuracy | |
| Measure Duration | |
| Spectral Range | |
| Resolution | |
| Note |
| Frequency | |
| Chips | |
| Protocol |
| Protocol |
| Reading Rate | |
| Reading Range |
| Accessories | Wrist strap, arm strap, magnetic handle |
| Note |
| Certifications |
| Emulation | |
| Software | |
| Resident Fonts | |
| Download Fonts | |
| Barcodes | |
| Code Page | |
| Graphics | |
| Options & Accessory | |
| Agency Approval |
| Processor | |
| Driver | |
| Print Head Life | |
| Internal Fonts | |
| Barcodes | |
| Rotation | |
| Emulation | |
| Factory Options | |
| Dealer Options | |
| Agency Approval |
| Data Collection Suite | |
| Printing/Encoding Suite | |
| Data Management | |
| Note |
| R5 Data Sheet2024-12-03 |
| R5 Accessories Guide2023-04-28 |
| R5 User Manual2023-04-28 |
| R5 Wearable RFID Reader Introduction2023-11-08 |
| Company Introduction2022-11-09 |
| Factory Introduction2022-05-17 |
